5×11 Rubber Sealed Ball Bearings 10 5x11x4 for Traxxas RC Vehicles 5116 Slash Rustler Stampede X-Maxx T-Maxx Slash 4×4 Stampede 4×4 Bigfoot TRA5116

#ad
#ad
Advantage Racing Products #ad - Please reference your manual for required sizes and installation instructions. Rubber sealed ball bearings have maximum protection, and are ideal for off-road racing. Meets/exceeds oem specifications for traxxas 5116 tra5116 5x11 Ball Bearings, used in many Traxxas models. Best selling 5x11 rubber sealed ball Bearings 10 5x11x4 MR115-2RS.

Direct replacement for TRA5116 ball bearings. They protect well against exposure to dust, and moisture, dirt, which can destroy bearings. Known to be compatible with: traxxas slash, slash 4x4, nitro rustler, t-maxx, bigfoot, nitro slash, nitro sport, Telluride, Nitro 4-Tec, funny car, Ford GT, Summit, Jato, stampede 4x4, e-revo, Rally Fiesta NOS, Stampede, Revo, E-Maxx, Nitro Stampede, Bandit, rally, rustler, x-maxx, TRX-4.

5x11 Rubber Sealed Ball Bearings 10 5x11x4 for Traxxas RC Vehicles 5116 Slash Rustler Stampede X-Maxx T-Maxx Slash 4x4 Stampede 4x4 Bigfoot TRA5116 #ad - Exceeds OEM Specifications. Over 250, 000 bearings have been sold to satisfied racers all over the world! . Includes ten 10 replacement 5x11 ball bearings for Traxxas RC Vehicles or any other applications where 5x11x4mm MR115 bearings are required. Advantage bearings have been run by some of the fastest racers in the world and have won multiple ROAR US National Championships.

More information about Advantage Racing Products #ad

Traxxas 1985 PTFE-coated washers, 5x8x0.5mm Set of 20

#ad
#ad
Traxxas TRA1985 #ad - Traxxas, truly the fastest name in Radio Control. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. This is the 1985 fiber Washers 5x8mm 20 from Traxxas. No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby.

. Ptfe-coated washers. Use with ball bearings. 5x8x05mm 20 This product is made from high quality materials and designed for lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

More information about Traxxas TRA1985 #ad


Similar products



RPM Front Bearing Carrier 2WD Electric Slash, Rustler, Stampede, Bandit, and Nitro Slash, Black

#ad
#ad
HRP Distribution RPM80372 #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. This product is made from high quality materials and designed for lasting performance. 5x8x05mm 20 When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you.

RPM Front Bearing Carrier 2WD Electric Slash, Rustler, Stampede, Bandit, and Nitro Slash, Black #ad - These carriers allow the use of massive 5mm x 11mm bearings the same used in stock nitro Rustler / Stampede trucks to be installed on your E-version. Replaces weaker stock components. Proudly made in the USA. Bearings are not included with these kits 4 bearings are needed for each kit. Designed to increase durability.

Ptfe-coated washers. Use with ball bearings. Improved performance, less rolling resistance and less maintenance are all characteristics you can expect from these carriers and larger bearings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

More information about HRP Distribution RPM80372 #ad


Similar products



Replaces Traxxas Part 3631 - Atomik RC Alloy Front Lower Arm, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models

#ad
#ad
Venom Group International 4125B #ad - Atomik rc has a full line of aluminum hop up parts for your Traxxas 1/10 Slash, available now in blue, red, and grey/gunmetal. Replaces Traxxas Part No. Replaces weaker stock components. Precision cnc machined Hop Up Part for Factory Spec Fitment. Made from hardened billet 6061 Aluminum for Lightweight and Durable Performance.

Fits the following traxxas models: traxxas 1/10 slash, traxxas 1/10 rustler, traxxas 1/10 ford f150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Stampede, Traxxas 1/10 Nitro Slash, Traxxas 1/10 Monster Jam Series. Use with ball bearings. 5x8x05mm 20 This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Replaces Traxxas Part 3631 - Atomik RC Alloy Front Lower Arm, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models #ad - Replaces traxxas Part 3631. This product is made from high quality materials and designed for lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Precision cnc machined for Factory Spec Fitment. Hardened billet 6061 Aluminum for Lightweight and Durable Performance.

Atomik rc offers a full line of hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal. Also fits: traxxas 1/10 stampede, 1/10 rustler, 1/10 ford svt raptor, 1/10 Dakar, 1/10 Nitro Slash.

More information about Venom Group International 4125B #ad


Similar products



Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear

#ad
#ad
Traxxas TRA2388X #ad - This product is made from high quality materials and designed for long-lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Replaces traxxas Part 3631. Complete planetary gear differential with steel ring gear and hardware. Use with ball bearings.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This product is made from high quality materials and designed for lasting performance. Replaces weaker stock components. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Designed to increase durability. Fits electric bandit, Rustler, Stampede, and Slash 2WD. Replaces worn or damaged parts.

It comes complete with all gears and hardware. Bearings are not included with these kits 4 bearings are needed for each kit.

More information about Traxxas TRA2388X #ad


Similar products



Traxxas 3637 Front Axles pair

#ad
#ad
Traxxas TRA3637 #ad - Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. Bearings are not included with these kits 4 bearings are needed for each kit. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Precision cnc machined for Factory Spec Fitment.

Hardened billet 6061 Aluminum for Lightweight and Durable Performance. Atomik rc offers a full line of hop Ups for your Traxxas Model, Red, Available in Blue, and Gunmetal. Also fits: traxxas 1/10 stampede, 1/10 rustler, 1/10 ford svt raptor, 1/10 Dakar, 1/10 Nitro Slash. Easy upgrade from original Part. This is the 3637 Front Axles 2 from Traxxas.

Traxxas 3637 Front Axles pair #ad - Front axles. Replaces worn or damaged parts. Replaces traxxas Part 3631. Complete planetary gear differential with steel ring gear and hardware. Replaces weaker stock components. Fits electric bandit, Stampede, Rustler, and Slash 2WD. Replaces worn or damaged parts. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

More information about Traxxas TRA3637 #ad


Similar products



Traxxas 3696 30-T Steel Idler Gear

#ad
#ad
Traxxas TRA3696 #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

This product is made from high quality materials and designed for long-lasting performance. Comes as a pair. This product is made from high quality materials and designed for lasting performance. Use with ball bearings. Bearings are not included with these kits 4 bearings are needed for each kit. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Traxxas 3696 30-T Steel Idler Gear #ad - Replaces weaker stock components. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles! This product is made from high quality materials, and designed for lasting performance.

This is for use on rc vehicles such as the Traxxas Rustler, consult your user's manual for exact parts listings. Precision cnc machined for Factory Spec Fitment.

More information about Traxxas TRA3696 #ad


Similar products



Traxxas 3640 Steel Suspension Screw Pin Set Rustler, Stampede, Bandit

#ad
#ad
Traxxas TRA3640 #ad - This product is made from high quality materials and designed for lasting performance. Comes as a pair. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. Bearings are not included with these kits 4 bearings are needed for each kit. Front axles.

30-tooth gear. No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. This product is made from high quality materials, and designed for lasting performance. This is for use on rc vehicles such as the Traxxas Rustler, consult your user's manual for exact parts listings.

Traxxas 3640 Steel Suspension Screw Pin Set Rustler, Stampede, Bandit #ad - Suspension screw pin set. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. 5x8x05mm 20 Replaces weaker stock components. This is for use on rc vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Replaces traxxas Part 3631.

More information about Traxxas TRA3640 #ad


Similar products



Traxxas 3752 Stub Axle Carriers pair

#ad
#ad
Traxxas TRA3752 #ad - Steel hex drive. This is for use on rc vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings. Requires 5x11x4mm bearings or bushings not included. Replaces worn or damaged parts. Proudly made in the USA. 5x8x05mm 20 Traxxas 3752 rear stub axle carriers are a direct oEM replacement for Electric Traxxas Rustler, 2WD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles.

Fits rustler, Stampede, Bandit. Each axle carrier requires two 5x11x4mm bearings or bushings not included Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for lasting performance. Steel construction.

Traxxas 3752 Stub Axle Carriers pair #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Fits electric bandit, Stampede, Rustler, and Slash 2WD. Replaces worn or damaged parts. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Fits electric traxxas rustler, 2wD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles.

More information about Traxxas TRA3752 #ad


Similar products



RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black

#ad
#ad
HRP Distribution RPM80382 #ad - Replaces weaker stock components. Fits electric bandit, Rustler, Stampede, and Slash 2WD. Replaces worn or damaged parts. Precision cnc machined for Factory Spec Fitment. Hardened billet 6061 Aluminum for Lightweight and Durable Performance. Atomik rc offers a full line of hop Ups for your Traxxas Model, Red, Available in Blue, and Gunmetal.

Also fits: traxxas 1/10 stampede, 1/10 ford svt raptor, 1/10 Dakar, 1/10 Rustler, 1/10 Nitro Slash. Easy upgrade from original Part. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Requires 5x11x4mm bearings or bushings not included. Bearings are not included with these kits 4 bearings are needed for each kit.

RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black #ad - This product is made from high quality materials and designed for lasting performance. Proudly made in the USA. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Proudly made in the USA. This product is made from high quality materials, and designed for lasting performance.

This is for use on rc vehicles such as the Traxxas Rustler, consult your user's manual for exact parts listings. Suspension screw pin set.

More information about HRP Distribution RPM80382 #ad


Similar products



SummitLink Traxxas TRX 3752 Upgrade CNC Alloy Part Blue Rear Axle Carrier for 1/10 Scale Stampede Slash Rustler Bandit 1:10

#ad
#ad
Summitlink #ad - Front axles. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Made of cnc Aluminum Never Breaks. Optional for many Traxxas vehicles. Requires 5x11x4mm bearings or bushings not included. Upgraded cnc alloy part for Traxxas TRX 3752. Replaces worn or damaged parts. Cool looking and high performance.

SummitLink Traxxas TRX 3752 Upgrade CNC Alloy Part Blue Rear Axle Carrier for 1/10 Scale Stampede Slash Rustler Bandit 1:10 #ad - Fits electric traxxas rustler, 2wD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles. Fits rustler, Stampede, Bandit. Designed to increase durability. 5x8x05mm 20 Replaces worn or damaged parts. Cool looking and high performance. Upgraded cnc alloy part for Traxxas TRX 3752. This product is made from high quality materials and designed for lasting performance.

30-tooth gear. Precision cnc machined for Factory Spec Fitment. Hardened billet 6061 Aluminum for Lightweight and Durable Performance. Atomik rc offers a full line of hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal.

More information about Summitlink #ad


Similar products

Comments are closed.