Fill-Rite FR4211G 12V 20 GPM Fuel Transfer Pump with Discharge Hose, Manual Nozzle, Suction Pipe, Mechanical Gallon Meter

#ad
#ad
Tuthill FR4211G #ad - Capable of providing a suction lift of up to 6. 5' diesel. It can be used to pump gasoline, methanol blends up to 15%, diesel, kerosene, ethanol blends up to 15%, and bio-diesel up to B20. Thermal overload protection prevents motor from overheating during abnormal usage. 20 amp draw maximum with a 30 minute duty cycle.

Fill-Rite FR4211G 12V 20 GPM Fuel Transfer Pump with Discharge Hose, Manual Nozzle, Suction Pipe, Mechanical Gallon Meter #ad - The fr4211g is a 12v 20 gpm fuel transfer pump that comes with a 1” manual nozzle, 1” x 12’ discharge hose, 900 series mechanical 4-digit fuel transfer gallon meter including hardware, 1” x 34” telescoping steel suction pipe, 18’ 12 gauge 2-wire battery cable, and a 5’ 12-gauge ground wire.

1/4 hp dc motor @ 2, 600 rpm provides up to 37' of discharge head. Durable cast iron pump housing built to withstand the wear and tear of rough operating environments.

More information about Tuthill FR4211G #ad

Apache AS-3075BLUE Fuel Swivel, 1"

#ad
#ad
Apache 99000234 #ad - Swivels a full 360 deg Degree. Product is Manufactured in China. This product meets customer Requirement. This product meets customer requirement. Product is Manufactured in China. Swivel end for use with Apache fuel transfer hose & Fuel nozzles. Swivel end for use with Apache fuel transfer hose and fuel nozzles.

Apache AS-3075BLUE Fuel Swivel, 1" #ad - Swivel helps prevent twisting, binding, & kinking of fuel transfer hose.

More information about Apache 99000234 #ad


Similar products



Green Auto Shut-Faucet Freezing Diesel Nozzle

#ad
#ad
Apache 99000247 #ad - Swivel end for use with Apache fuel transfer hose and fuel nozzles. Designed for fuel applications requiring an auto shut-off. Designed for fuel applications requiring an auto shut-off. For use with gasoline, and gasoline blends, 15% ethanol E85, methanol, and diesel fuel. A minimum of 10 psi pounds per square inch is required to operate the auto shut-off.

. This product meets customer Requirement. Product is Manufactured in China. Do not use on gravity flow systems. Product is manufactured in China. This product meets customer requirement. Small, and lightweight with a low profile aluminum body and a full hand insulator that protects the nozzle and vehicle, trim, insulates hand when in use.

Green Auto Shut-Faucet Freezing Diesel Nozzle #ad - Product is manufactured in China. This product meets customer requirement. Hold open handle clip for fast, effortless filling.

More information about Apache 99000247 #ad


Similar products



Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose

#ad
#ad
Tuthill FRH10020 #ad - Dispense diesel fuel, gasoline, kerosene, and petroleum oils. Designed for use with all electric pumps. Product is manufactured in China. High quality Nitrile inner tube. Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”.

Swivel end for use with Apache fuel transfer hose and fuel nozzles. Designed for fuel applications requiring an auto shut-off. We use only the most durable materials to insure long life and dependability. Product is Manufactured in China. Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose #ad - . This product meets customer Requirement. This product meets customer requirement.

More information about Tuthill FRH10020 #ad


Similar products



Fill-Rite N100DAU13 Ultra High Flow Automatic Nozzle, 1" Length

#ad
#ad
Tuthill N100DAU13 #ad - Three-position latch for automatic flow at 30, 24 and 8 GPM. Swivel end for use with Apache fuel transfer hose and fuel nozzles. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation.

This product meets customer requirement. Product is Manufactured in China. 50 psi working pressure and Angled outlet to minimize hose wear. Automatic shut-off and Large spout spring to hold nozzle in place. Ul listed for gasoline, diesel and kerosene. This product meets customer Requirement. Product is manufactured in China.

Fill-Rite N100DAU13 Ultra High Flow Automatic Nozzle, 1" Length #ad - We use only the most durable materials to insure long life and dependability. Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. Designed for fuel applications requiring an auto shut-off.

High quality Nitrile inner tube. Minimal spray pattern reduces foaming and false shut offs. Insulated hand grip and rated to -20 Fahrenheit operation.

More information about Tuthill N100DAU13 #ad


Similar products



Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle

#ad
#ad
Tuthill N075DAU10 #ad - High quality Nitrile inner tube. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. Product is manufactured in China. 3/4” automatic Nozzle for diesel fuel. Automatic shut-off and Large spout spring to hold nozzle in place. Ul listed for gasoline, diesel and kerosene. This product meets customer Requirement.

Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. Designed for fuel applications requiring an auto shut-off. Made in USA. Minimal spray pattern reduces foaming and false shut offs. Dispense diesel fuel, gasoline, kerosene, and petroleum oils. Designed for use with all electric pumps.

Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle #ad - Convenient one-finger hold-open clip to set flow rate Swivel end for use with Apache fuel transfer hose and fuel nozzles. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Product is Manufactured in China. Includes grip spring on spout, green weather resistant cover, angled inlet to reduce hose wear, heavy duty, UL/cUL.

Insulated hand grip and rated to -20 Fahrenheit operation. This product meets customer requirement.

More information about Tuthill N075DAU10 #ad


Similar products



Fill-Rite S100H1315 1" Multi-Plane Swivel

#ad
#ad
Tuthill Transfer Systems S100H1315 #ad - 1", prevents hose from kinking, swivel connection can be used with hose & nozzle to allow more freedom of movement, arctic rated for - 40 degrees Fahrenheit/Celsius, multi-plane hydraulic hose swivel, full 360 degree rotation extends life of hoses. Product is highly durable and very easy to use. This product is manufactured in china.

50 psi working pressure and Angled outlet to minimize hose wear. Automatic shut-off and Large spout spring to hold nozzle in place. This product meets customer requirement. Minimal spray pattern reduces foaming and false shut offs. Swivel end for use with Apache fuel transfer hose and fuel nozzles. This product adds a great value.

Fill-Rite S100H1315 1" Multi-Plane Swivel #ad - Viton seals for resistance to heat and chemicals. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Ul listed for gasoline, diesel and kerosene. Product is manufactured in China. Product is Manufactured in China. Dispense diesel fuel, kerosene, gasoline, and petroleum oils.

More information about Tuthill Transfer Systems S100H1315 #ad


Similar products



Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose

#ad
#ad
Tuthill FRH07520 #ad - 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. This product adds a great value. This product is manufactured in China. Insulated hand grip and rated to -20 Fahrenheit operation. Product is manufactured in China. This product is manufactured in USA. Product is highly durable and very easy to use.

This product meets customer Requirement. Swivel end for use with Apache fuel transfer hose and fuel nozzles. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. This product adds a great value. Aluminum for resistance to corrosion and tarnishing. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings.

Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose #ad - Minimal spray pattern reduces foaming and false shut offs. Ul listed for gasoline, diesel and kerosene. 50 psi working pressure and Angled outlet to minimize hose wear. 3/4" x 20', fuel pump hose, with static wire, & threaded fittings, Spring Guards, For All 12V & AC Products With 3/4" Outlets. Heavy duty hanging hook compatible with all Fill-Rite products.

This product adds a great value.

More information about Tuthill FRH07520 #ad


Similar products



GOLDENROD 495 Bowl Fuel Tank Filter with 1" NPT Top Cap

#ad
#ad
Dutton-Lainson Company 495 #ad - Designed for fuel applications requiring an auto shut-off. This product adds a great value. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. Product is highly durable and very easy to use. Minimal spray pattern reduces foaming and false shut offs. This product is manufactured in USA.

GOLDENROD 495 Bowl Fuel Tank Filter with 1" NPT Top Cap #ad - This product is manufactured in China. Maximum recommended flow rate of 25 gPM gravity flow rate is approximately 5 gpm with a 24 inch head; working pressure up to 150 psi. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. U. S. This product adds a great value. See-thru bowl has an easy to use sediment drain valve and allows for visual monitoring of fuel flow.

Swivel end for use with Apache fuel transfer hose and fuel nozzles. Viton seals for resistance to heat and chemicals. Product is manufactured in China. Product is Manufactured in China. Heavy duty hanging hook compatible with all Fill-Rite products. High quality Nitrile inner tube.

More information about Dutton-Lainson Company 495 #ad


Similar products



GOLDENROD 496 Bowl Water-Block Fuel Tank Filter with 1" NPT Top Cap

#ad
#ad
Dutton-Lainson Company 496 #ad - Product is manufactured in China. This product is manufactured in USA. Automatic shut-off and Large spout spring to hold nozzle in place. Aluminum for resistance to corrosion and tarnishing. This product meets customer requirement. For use with goldenrod see thru bowl fuel tank filter models 495, 495-3/4, 496, and 496-3/4 only.

Not for use with biodiesel blends over 20 percent or GOLDENROD bowl fuel tank filter models 497 or 497-3/4. Made in the U. S. A. Maximum recommended flow rate of 25 gPM gravity flow rate is approximately 5 gpm with a 24 inch head; working pressure up to 150 psi. Designed for fuel applications requiring an auto shut-off.

GOLDENROD 496 Bowl Water-Block Fuel Tank Filter with 1" NPT Top Cap #ad - 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Bowl fuel tank filter top cap with 3/4" NPT pipe fittings for standard and water-absorbing GOLDENROD bowl fuel tank filters. Insulated hand grip and rated to -20 Fahrenheit operation. Restricting fuel flow when it is time to replace the element,.

3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. Viton seals for resistance to heat and chemicals. Three-position latch for automatic flow at 30, 24 and 8 GPM.

More information about Dutton-Lainson Company 496 #ad


Similar products



Apache CPT02 Fuel Swivel, Original Version, 3/4"

#ad
#ad
Apache 99000233 #ad - Zinc die-cast top cap with 3/4" NPT pipe fittings. Removes water from gasoline & diesel fuel,. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. This product is manufactured in USA. For use with goldenrod see thru bowl fuel tank filter models 495, 496, 495-3/4, and 496-3/4 only. Not for use with biodiesel blends over 20 percent or GOLDENROD bowl fuel tank filter models 497 or 497-3/4.

Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. This product adds a great value. Swivels a full 360 deg Degree. Product is Manufactured in China. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination.

Apache CPT02 Fuel Swivel, Original Version, 3/4" #ad - Product is Manufactured in China. Maximum recommended flow rate of 25 gPM gravity flow rate is approximately 5 gpm with a 24 inch head; working pressure up to 150 psi. See-thru bowl has an easy to use sediment drain valve and allows for visual monitoring of fuel flow. Product is Manufactured in China. Aluminum for resistance to corrosion and tarnishing.

More information about Apache 99000233 #ad


Similar products

Comments are closed.