Hakko CHP CSP-30-7 Wire Stripper, 16-26 Gauge Maximum Cutting Capacity

#ad
#ad
Quality Hand Tools CSP-30-7 #ad - Hakko CHP CSP-30-7 Wire Stripper, 16-26 Gauge Maximum Cutting Capacity #ad - The hakko csp-30-7 is a multi-function wire stripper, shear and pliers. Maximum cutting Capacity is 26-16 Gauge.

More information about Quality Hand Tools CSP-30-7 #ad

Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel

#ad
#ad
Quality Hand Tools PN-2007 #ad - The flat nose reduces the risk of damage to delicate parts and provides a wider surface for gripping parts. Flat outside edge eases access to recessed or component-dense areas. The 3mm heat-treated carbon steel construction provides durability and long life. The tool has precision-ground holes and surfaces that provide precise movement.

3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. 32mm serrated jaw with precision-ground surfaces provides smooth operation. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.

The company, founded in 1984, is headquartered in Valencia, CA. Serrated jaws ease handling of small diameter parts, and the flat outside edges ease access to recessed or component-dense areas. Long flat-nose pliers with 3mm width for general purpose electronics applications. Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces.

Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel #ad - The hakko chp pn-2007 long-nose pliers has a flat nose with 3mm width, a flat outside edge, 32mm smooth jaws, and Parkerized surfaces for general purpose electronics applications. The 32mm serrated jaws have precision-ground surfaces that provide smooth operation. Parkerized surfaces prevent glare and increase corrosion resistance.

More information about Quality Hand Tools PN-2007 #ad


Similar products



Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity

#ad
#ad
Quality Hand Tools CSP-30-2 #ad - The hakko csp-30-2 is a very strong multi-function wire stripper, shear and pliers. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Maximum cutting Capacity is 20-10 Gauge. Flat outside edge eases access to recessed or component-dense areas.

Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity #ad - 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. 32mm serrated jaw with precision-ground surfaces provides smooth operation. Long flat-nose pliers with 3mm width for general purpose electronics applications.

More information about Quality Hand Tools CSP-30-2 #ad


Similar products



CHP-170 Micro Cutter

#ad
#ad
Quality Hand Tools CHP-170 #ad - Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. The hakko chp 170 micro soft-wire cutter has an 8mm long jaw set at a 21-degree angle for flush-cutting terminal wires up to 16 gauge 1. 3mm. The tool is constructed of 2. 5mm heat-treated carbon steel that provides durability and long life.

Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces. 2. 5mm heat-treated carbon steel construction provides durability and long life. Flat outside edge eases access to recessed or component-dense areas. Precision-ground holes and surfaces provide smooth movement.

CHP-170 Micro Cutter #ad - 32mm serrated jaw with precision-ground surfaces provides smooth operation. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. 21-degree. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

Maximum cutting Capacity is 20-10 Gauge.

More information about Quality Hand Tools CHP-170 #ad


Similar products



Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity

#ad
#ad
Quality Hand Tools CSP-30-1 #ad - American hakko Products manufactures soldering and desoldering tools. Flat outside edge eases access to recessed or component-dense areas. Heat-treated steel for strength and durability. 21-degree. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.

Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 32mm serrated jaw with precision-ground surfaces provides smooth operation. 2. 5mm heat-treated carbon steel construction provides durability and long life. 30-20 gauge maximum cutting capacity.

Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity #ad - Maximum cutting Capacity is 20-10 Gauge. The company, founded in 1984, is headquartered in Valencia, CA. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. It is made of heat-treated steel for strength and durability and has serrated pliers for a strong grip.

It has soft, rounded rubber grips for secure hold and has a 30-20 American Wire Gauge AWG maximum cutting capacity. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1.

More information about Quality Hand Tools CSP-30-1 #ad


Similar products



Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel

#ad
#ad
Quality Hand Tools PN-2008 #ad - Soft, rounded rubber grips for secure hold. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Flat outside edge eases access to recessed or component-dense areas. The flat nose reduces the risk of damage to delicate parts and provides a wider surface for gripping parts.

32mm smooth jaw with precision-ground surfaces provides smooth operation. Serrated pliers for a strong grip. 21-degree. Flat outside edge eases access to recessed or component-dense areas. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.

Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel #ad - Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Long flat-nose pliers with 3mm width for general purpose electronics applications. The tool has precision-ground holes and surfaces that provide precise movement. Maximum cutting Capacity is 20-10 Gauge.

The 32mm smooth jaws have precision-ground surfaces that provide smooth operation. The hakko chp pn-2008 long-nose pliers has a flat nose with 3mm width, 32mm smooth jaws, a flat outside edge, and Parkerized surfaces for general purpose electronics applications.

More information about Quality Hand Tools PN-2008 #ad


Similar products



Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity

#ad
#ad
Quality Hand Tools TRR-58-G #ad - Flat outside edge eases access to recessed or component-dense areas. The company, founded in 1984, is headquartered in Valencia, CA. Parkerized surfaces prevent glare and increase corrosion resistance. American hakko Products manufactures soldering and desoldering tools. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.

Long flat-nose pliers with 3mm width for general purpose electronics applications. The hakko chp trr-58-g flush-cut medium soft-wire cutter has a 14mm long jaw set at a 21-degree angle for cutting rubber seals and copper and other soft wire up to 10 AWG 2. 5mm. Flat outside edge eases access to recessed or component-dense areas.

Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity #ad - Hrc 58-rated 3. 0mm heat-treated carbon steel construction provides durability and long life. The 3. 0mm heat-treated carbon steel is rated Rockwell hardness HRC 58 for durability and long life. The angled head enables wire to be cut flush to the work surface. Flush-cut medium soft-wire cutter has 14mm long jaw with angled head for cutting rubber seals and flush-cutting applications on copper and soft wire up to 10 gauge 2.

More information about Quality Hand Tools TRR-58-G #ad


Similar products



Hakko CHP Micro Cutter, Clean Cut, 16 AWG set of 5

#ad
#ad
hakko CHP-170 #ad - Ergonomic handle for comfort. Max cut: 16 AWG. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. 21-degree. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.

Flat outside edge eases access to recessed or component-dense areas. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Serrated pliers for a strong grip. Rockwell hardness RHC 56. 16 awg maximum cut. 32mm smooth jaw with precision-ground surfaces provides smooth operation.

Hakko CHP Micro Cutter, Clean Cut, 16 AWG set of 5 #ad - 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Max cut: 16 wag. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Long flat-nose pliers with 3mm width for general purpose electronics applications.

Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

More information about hakko CHP-170 #ad


Similar products



Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length

#ad
#ad
Quality Hand Tools 3-SA #ad - Soft, rounded rubber grips for secure hold. 4-3/4" 120mm length. 21-degree. 32mm serrated jaw with precision-ground surfaces provides smooth operation. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

The hakko chp 3-sa pattern 3 tweezers with very-fine points have a smooth shaft for use in electronics assembly applications. Heat-treated steel for strength and durability. The fine-point tips provide access to tight areas and are used for delicate precision work. Flush-cut medium soft-wire cutter has 14mm long jaw with angled head for cutting rubber seals and flush-cutting applications on copper and soft wire up to 10 gauge 2.

Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length #ad - 5mm. Cut: flush. The company, founded in 1984, is headquartered in Valencia, CA. Combination wire stripper, shear, and pliers for multiple uses. Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance.

Maximum cutting Capacity is 20-10 Gauge. Pattern 3 tweezers with very-fine point tips for use in electronics assembly.

More information about Quality Hand Tools 3-SA #ad


Similar products



Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter

#ad
#ad
Kester 24-6337-0027 #ad - Flat outside edge eases access to recessed or component-dense areas. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Long flat-nose pliers with 3mm width for general purpose electronics applications. Serrated pliers for a strong grip.

Ergonomic handle for comfort. Although" 44" is a ra-based material, the residues are non-corrosive If not cleaned. Composition: 63 percent tin, 37 percent lead. 0031 inch. 32mm serrated jaw with precision-ground surfaces provides smooth operation. Core size: 66. Long flat-nose pliers with 3mm width for general purpose electronics applications.

Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter #ad - 4-3/4" 120mm length. Non-serrated tip for delicate applications. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.

Max cut: 16 wag. Pattern 3 tweezers with very-fine point tips for use in electronics assembly.

More information about Kester 24-6337-0027 #ad


Similar products



Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length

#ad
#ad
Quality Hand Tools 7-SA #ad - 32mm serrated jaw with precision-ground surfaces provides smooth operation. The curved tines ease gripping in high-density areas. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.

Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length #ad - Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Long flat-nose pliers with 3mm width for general purpose electronics applications. Combination wire stripper, shear, and pliers for multiple uses. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.

Heat-treated steel for strength and durability. Max cut: 16 wag. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. The tweezers is 4-1/2" 118mm long. American hakko Products manufactures soldering and desoldering tools. 0

More information about Quality Hand Tools 7-SA #ad


Similar products

Comments are closed.