ImpressArt- Basic Bridgette Lowercase Letter Metal Stamp Set

#ad
#ad
ImpressArt SCE1315-3mm #ad - ImpressArt- Basic Bridgette Lowercase Letter Metal Stamp Set #ad - This graceful, whispy typeface is perfect for upbeat messages and softer-looking stamped jewelry and craft designs. Avoid wiping with anything wet - water will cause stamps to rust. Size: 3mm will stamp letters approximately 3mm tall. In order to prevent rust, these stamp sets are lightly coated with oil. Simply wipe down with a dry paper towel or rag before using.

For stamping soft metals including aluminum, brass, copper, pewter, nickel silver, alkeme, and also wood. Includes full alphabet and "?" symbol. Impressart's bridgette letter stamps have that hand-written, finger-brushed look, but are also crisp and easy to read.

More information about ImpressArt SCE1315-3mm #ad

ImpressArt- Whimsy Heart Design Stamp, 3mm

#ad
#ad
ImpressArt SC158-K-3MM #ad - ImpressArt- Whimsy Heart Design Stamp, 3mm #ad - Designs are precision-cut from carbon tool steel, hardened to last project after project. For stamping soft metals including brass, aluminum, copper, pewter as well as wood, gold, nickel silver, sterling silver, clay, and matte board. Impression Size: 3mm. Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry.

These professional quality stamps are created to the highest standard for durability and alignment.

More information about ImpressArt SC158-K-3MM #ad


Similar products



ImpressArt 1 Pound Metal Stamping Hammer

#ad
#ad
ImpressArt SC711 #ad - 1 pound brass head creates crisp even impressions. The 1 pound brass head is designed to prevent double impressions and protects your metal stamps so they'll last longer. 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. For stamping soft metals including brass, copper, pewter as well as wood, clay, aluminum, sterling silver, gold, nickel silver, and matte board.

ImpressArt 1 Pound Metal Stamping Hammer #ad - Impression Size: 3mm. First ever hammer designed specially for metal stamping. Its scaled down ergonomic handle makes the hammer easy to handle and ensures force and accuracy. Impressart's metal stamping hammer is the first hammer ever to be designed specifically for metal stamping. Brass head prolongs the life of your metal stamps.

More information about ImpressArt SC711 #ad


Similar products



ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound

#ad
#ad
ImpressArt SC721 #ad - Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Its weighted brass head and ergonomic features help achieve evenly stamped impressions. For stamping soft metals including brass, aluminum, sterling silver, copper, pewter as well as wood, nickel silver, clay, gold, and matte board.

Impression Size: 3mm. The ergo-angle metal stamping Hammer is a signature ImpressArt tool and an important asset contributing to elevated jewelry stamping. First ever hammer designed specially for metal stamping. Brass head prolongs the life of your metal stamps. The development of the ergo-angle hammer involved a series of field tests performed by ImpressArt Certified Bench Jewelers, who have identified the optimal striking angle and holding points for precision and comfort when working with metal stamps.

ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound #ad - 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. 1 lb one pound top-weighted, ideal for deep, crisp markings. This is by design and will not affect the quality of your stamping. Experience the ergo-angle on your next metal stamped project! NOTE: being that the brass head is softer than steel stamps, the brass head will dent and flake when stamping.

Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Brass head can easily be replaced when necessary Replacement SKU: SC721-R.

More information about ImpressArt SC721 #ad


Similar products



ImpressArt Simple Strike Metal Stamping Jig, 3mm Metal Stamping Tools

#ad
#ad
ImpressArt SC10-3mm #ad - Protects your fingers and keeps the stamp flush for even impressions. The simple strike Jig is designed to help you produce perfect impressions when metal stamping. First ever hammer designed specially for metal stamping. 1 lb one pound top-weighted, ideal for deep, crisp markings. Brass head prolongs the life of your metal stamps.

1 pound brass head creates crisp even impressions. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Simply place the stamp in the jig, hold the jig firmly, and stamp. Great beginner metal stamping tool. Holds 3mm ImpressArt metal stamps. Includes free 3mm heart design metal stamp! Easy grip stamp holder makes stamping easy!

ImpressArt Simple Strike Metal Stamping Jig, 3mm Metal Stamping Tools #ad - 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. The jig holds the stamp flush, pewter as well as wood, aluminum, nickel silver, so you will always achieve an even, gold, sterling silver, clay, clear impression while saving your fingers! Includes 3mm heart design stamp For stamping soft metals including brass, copper, and matte board.

Impression Size: 3mm. Note: before use, tighten brass head with pliers to ensure it's secure on hammer.

More information about ImpressArt SC10-3mm #ad


Similar products



ImpressArt Bracelet Bending Bar Kit w/ 7 Bracelet Stamping Blanks

#ad
#ad
ImpressArt SC910-KIT #ad - The bending Bar easily shapes the aluminum blanks into bracelets. Then do the same for the other end and you have a finished bracelet. 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Brass head eliminates double impressions caused by steel head hammers. 1 pound brass head creates crisp even impressions.

Brass head prolongs the life of your metal stamps. First ever hammer designed specially for metal stamping. Includes free 3mm heart design metal stamp! Easily create metal bracelets with this Bracelet Bending Bar Kit. Protects your fingers and keeps the stamp flush for even impressions. Note: before use, tighten brass head with pliers to ensure it's secure on hammer.

ImpressArt Bracelet Bending Bar Kit w/ 7 Bracelet Stamping Blanks #ad - Simply place the strip into the notch and bend around the curved arch. Essential metal stamping tools and supplies. Simply place the strip into the notch and bend around the curved arch. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. 1 lb one pound top-weighted, ideal for deep, crisp markings.

Holds 3mm ImpressArt metal stamps.

More information about ImpressArt SC910-KIT #ad


Similar products



Beadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-Inch

#ad
#ad
Beadsmith V-BB44 #ad - Protects your fingers and keeps the stamp flush for even impressions. 1 pound brass head creates crisp even impressions. For stamping soft metals including brass, clay, gold, pewter as well as wood, copper, sterling silver, aluminum, nickel silver, and matte board. Impression Size: 3mm. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge.

Beadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-Inch #ad - Essential metal stamping tools and supplies. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Brass head eliminates double impressions caused by steel head hammers. The ideal surface for letter imprinting; riveting; texturing and hammering- you never have to worry about marring your craft table again! This package contains one 4x4x1/2 inch Bench Block.

Easily shapes soft metals into bracelet. Includes free 3mm heart design metal stamp!1 lb one pound top-weighted, ideal for deep, crisp markings. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. Imported.

More information about Beadsmith V-BB44 #ad


Similar products



ImpressArt Stamp Straight Tape

#ad
#ad
ImpressArt SC21-532 #ad - Now all of your stamps will line up perfectly. Contains one 4x4x1/2 inch Bench Block. Essential metal stamping tools and supplies. Holds 3mm ImpressArt metal stamps. Great beginner metal stamping tool. 1 pound brass head creates crisp even impressions. Mark stamping Blanks for Accurate Metal Stamping. Note: before use, tighten brass head with pliers to ensure it's secure on hammer.

The ideal surface for letter imprinting; riveting; texturing and hammering. First ever hammer designed specially for metal stamping. Includes free 3mm heart design metal stamp!1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Simply create a straight line with the top edge of the tape along your workpiece to create a guide.

ImpressArt Stamp Straight Tape #ad - To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. 1 lb one pound top-weighted, ideal for deep, crisp markings. Brass head prolongs the life of your metal stamps.

Accommodates bracelet stamping blanks, up to 1 1/2" inch wide.

More information about ImpressArt SC21-532 #ad


Similar products



Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.

#ad
#ad
Bastex W2: TL56 STAMP HAMMER #ad - Never mar your craft table again. Helps to prevent double impressions and protects the longevity of your stamps. Contains one 4x4x1/2 inch Bench Block. The one pound weight of the hammer's head also provides optimal weight for deep impressions. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. Brass head eliminates double impressions caused by steel head hammers.

Mark stamping Blanks for Accurate Metal Stamping. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow. Precision: because of it's scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings.

Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing. #ad - Essential metal stamping tools and supplies. The ideal surface for letter imprinting; riveting; texturing and hammering. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. Sturdy and grooved grip allows for maximum and precise strikes. Helps evenly Space Out Letters.

It has a smaller and scaled down grip designed for easy handling and precision striking. General usage: the brass 1 pound metal stamping hammer was designed for metal stamping.

More information about Bastex W2: TL56 STAMP HAMMER #ad


Similar products



ImpressArt Stamp Enamel Marker for Metal Stamping

#ad
#ad
ImpressArt #ad - Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. 1 pound brass head creates crisp even impressions. Add effect by filling in metal stamped impressions with enamel. Mark stamping Blanks for Accurate Metal Stamping. First ever hammer designed specially for metal stamping.

Never mar your craft table again. Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Acrylic Ink application marker. 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. Protects your fingers and keeps the stamp flush for even impressions.

ImpressArt Stamp Enamel Marker for Metal Stamping #ad - Sturdy and grooved grip allows for maximum and precise strikes. Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Brass head eliminates double impressions caused by steel head hammers. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide.

Easily shapes soft metals into bracelet. Helps to prevent double impressions and protects the longevity of your stamps.

More information about ImpressArt #ad


Similar products



ImpressArt Steel Bench Block, 2" X 2" Metal Stamping Tools

#ad
#ad
ImpressArt SC22-SMALL #ad - Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Small steel metal stamping block. Brass head prolongs the life of your metal stamps. Protects your fingers and keeps the stamp flush for even impressions. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time.

Brass head eliminates double impressions caused by steel head hammers. It has a smaller and scaled down grip designed for easy handling and precision striking. Also works great for flattening wire for jewelry making. Great size for jewelry stamping blanks. Sturdy and grooved grip allows for maximum and precise strikes.

ImpressArt Steel Bench Block, 2" X 2" Metal Stamping Tools #ad - Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Surface: 2" x 2" - Height: 3/8". Add effect by filling in metal stamped impressions with enamel.

Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. Great beginner metal stamping tool.

More information about ImpressArt SC22-SMALL #ad


Similar products

Comments are closed.