Kerick Valve PS150SS PVC Float Valve, Standard Mount, 124 gpm at 50 psi, 1-1/2″ NPT Male

#ad
#ad
Kerick Valve PS150SS #ad - The valve is made of national sanitation foundation nsf approved PVC polyvinyl chloride, its replaceable seals are made of TPE thermoplastic elastomer for durability and chemical resistance, and its hardware is made of 18-8 stainless steel for corrosion resistance. Standard mount with NPT male threads for attaching to NPT female fittings.

1-1/2" npt male threaded inlet and outlet. Pvc for corrosion resistance. This kerick ps150ss float valve is a standard-mount style and is made of PVC with 18-8 stainless steel hardware. This float valve is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants.

Kerick Valve PS150SS PVC Float Valve, Standard Mount, 124 gpm at 50 psi, 1-1/2" NPT Male #ad - Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. For use with 12-18" x 5/16" stainless steel rod and 8" float ball sold separately. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, cooling towers, livestock water tanks, such as fountains, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. The valve inlet and outlet have 1-1/2" NPT male threads for attaching to NPT female fittings. The valve uses a 14", 16", or 18" x 5/16" stainless steel rod and a 6" or 8" float ball sold separately.

More information about Kerick Valve PS150SS #ad

Kerick Valve SR14 Stainless Steel Rod for Float Valve, 5/16" Diameter, 14" Length

#ad
#ad
Kerick Valve SR14 #ad - Kerick Valve SR14 Stainless Steel Rod for Float Valve, 5/16" Diameter, 14" Length #ad - Stainless steel rod, weight less than 1 lb, 5/16-18 In Connection, Length 14 In. Dia. 5/16 in. Male threaded, material of construction stainless steel, for Use With G0712257' For use with 1-1/4" and 1-1/2" inlet float valves and 8" float balls sold separately.5/16"-18 male threads at each end for mounting, 14" long.

18-8 stainless steel for corrosion resistance.

More information about Kerick Valve SR14 #ad


Similar products



Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length

#ad
#ad
Kerick Valve SR10 #ad - 5/16"-18 male threads at each end for mounting, 14" long. 1/4"-20 male threads at each end for mounting, 10" long. 18-8 stainless steel for corrosion resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 18-8 stainless steel for corrosion resistance. 1/4 in. G2011292, female threaded, g3142237, for use with g2666097, material of construction stainless Steel, G2986794 ' For use with 1-1/4" and 1-1/2" inlet float valves and 8" float balls sold separately.

Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length #ad - . Stainless steel rod, 1/4-20 in connection, Weight Less than 1 lb, Length 10 In. Dia.

More information about Kerick Valve SR10 #ad


Similar products



Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length

#ad
#ad
Kerick Valve SR06 #ad - As part of a float valve installation, it is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature.

When the angle of the valve lever changes sufficiently, the valve opens or closes. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 1/4"-20 male threads at each end for mounting, 10" long.

Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length #ad - The company, founded in 1994, is headquartered in Jacksonville, FL. It is intended for use with 3/8" and 1/2" inlet float valves and 4 x 5" or 2 x 2 x 4" float balls sold separately. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, livestock water tanks, cooling towers, such as fountains, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. 5/16"-18 male threads at each end for mounting, 14" long. 18-8 stainless steel for corrosion resistance.

More information about Kerick Valve SR06 #ad


Similar products



Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1" NPT Male

#ad
#ad
Kerick Valve PT100SS #ad - 18-8 stainless steel for corrosion resistance. Pvc for corrosion resistance. 1/4"-20 male threads at each end for mounting, 6" long. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow.

. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. 5/16"-18 male threads at each end for mounting, 14" long. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 18-8 stainless steel for corrosion resistance. 18-8 stainless steel for corrosion resistance.

Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1" NPT Male #ad - Orifice, compliance nsf/ansi 61, standard 169, valve material pvc ' For use with 1-1/4" and 1-1/2" inlet float valves and 8" float balls sold separately. Float valve with threaded Outlet, Mounting Bulkhead, Size 1 In. Connection type mnpT, Rod Thread 1/4 In. 20, valve flow - flow 2 60 gpm, valve flow - pressure 1 50 psi, body material PVC, Valve Flow - Pressure 2 40 psi, Valve Flow - Flow 1 69 gpm, Max.

Tank mount with extended threads on inlet side of valve for mounting through tank wall. 1" npt male threaded inlet and outlet.

More information about Kerick Valve PT100SS #ad


Similar products



Kerick Valve PS100SS PVC Float Valve, Standard Mount, 60 gpm at 60 psi, 1" NPT Male

#ad
#ad
Kerick Valve PS100SS #ad - 1" npt male threaded inlet and outlet. 1" npt male threaded inlet and outlet. 5/16"-18 male threads at each end for mounting, 14" long. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

Pvc for corrosion resistance. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. The company, is headquartered in Jacksonville, founded in 1994, FL. The valve inlet and outlet have 1" NPT male threads for attaching to NPT female fittings. This float valve is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants.

Kerick Valve PS100SS PVC Float Valve, Standard Mount, 60 gpm at 60 psi, 1" NPT Male #ad - Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, such as fountains, livestock water tanks, cooling towers, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. This valve has a 069" orifice with a "low" estimated rate of flow of 42 gallons per minute gpm at 30 pounds per square inch psi and 56 gpm at 60 psi and a "high" estimated rate of flow of 51 gpm at 30 psi and 69 gpm at 60 psi.

Pvc for corrosion resistance.

More information about Kerick Valve PS100SS #ad


Similar products



Kerick Valve PT75SS PVC Float Valve, Tank Mount, 37 gpm at 60 psi, 3/4" NPT Male

#ad
#ad
Kerick Valve PT75SS #ad - 18-8 stainless steel for corrosion resistance. Estimated rate of flow up to 37 gpm at 60 psi. 1/4"-20 male threads at each end for mounting, 10" long. Standard mount with NPT male threads for attaching to NPT female fittings. Float valve with threaded Outlet, Mounting Bulkhead, Size 3/4 In. Connection type mnpT, Rod Thread 1/4 In.

20, valve flow - pressure 1 60 psi, body material pvc, valve flow - flow 1 37 gpm, Valve Flow - Pressure 2 40 psi, Valve Flow - Flow 2 60 gpm, Max.1/4"-20 male threads at each end for mounting, 6" long. Tank mount with extended threads on inlet side of valve for mounting through tank wall. Pressure 100 psi, Features 0

Kerick Valve PT75SS PVC Float Valve, Tank Mount, 37 gpm at 60 psi, 3/4" NPT Male #ad - 50 in. 5/16"-18 male threads at each end for mounting, 14" long. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. Pvc for corrosion resistance. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. 1" npt male threaded inlet and outlet.

. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

More information about Kerick Valve PT75SS #ad


Similar products



Robert Manufacturing R452-12 Brass Stem, 3/8"-16 SAE Male, 12" Length

#ad
#ad
Control Devices R452-12 #ad - Brass metal rod. For use with 1-1/4" and 1-1/2" inlet float valves and 8" float balls sold separately. 3/4" npt male threaded inlet and outlet. 3/8"-16 sae male. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. Pvc for corrosion resistance. 1" npt male threaded inlet and outlet.

For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 1/4"-20 male threads at each end for mounting, 6" long. 18-8 stainless steel for corrosion resistance. Not compliant with cA Prop 65 or Safe Water Drinking Act. 18-8 stainless steel for corrosion resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

Robert Manufacturing R452-12 Brass Stem, 3/8"-16 SAE Male, 12" Length #ad - Male thread on both ends. 1" npt male threaded inlet and outlet. 5/16"-18 male threads at each end for mounting, 14" long. 1/4"-20 male threads at each end for mounting, 10" long. Estimated rate of flow up to 37 gpm at 60 psi. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

More information about Control Devices R452-12 #ad


Similar products



Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length

#ad
#ad
Kerick Valve SR12 #ad - 1" npt male threaded inlet and outlet. 1/4"-20 male threads at each end for mounting, 6" long. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. Pvc for corrosion resistance. 18-8 stainless steel for corrosion resistance. It is intended for use with 1" inlet float valves and 6" or 8" float balls sold separately.

. Estimated rate of flow up to 37 gpm at 60 psi. Standard mount with NPT male threads for attaching to NPT female fittings. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, such as fountains, livestock water tanks, cooling towers, and chemical manufacturing plants.

Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length #ad - Kerick valve manufactures fluid level control valves for industrial applications. 18-8 stainless steel for corrosion resistance. The company, founded in 1994, is headquartered in Jacksonville, FL. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied.

Not compliant with cA Prop 65 or Safe Water Drinking Act. Tank mount with extended threads on inlet side of valve for mounting through tank wall. 18-8 stainless steel for corrosion resistance.

More information about Kerick Valve SR12 #ad


Similar products



Robert Manufacturing RF610 Series Bob Red Brass Float Valve with Compound Operating Lever, 1-1/2" NPT Female Inlet x Free Flow Outlet, 180 gpm at 85 psi Pressure

#ad
#ad
Control Devices #ad - Brass metal rod. 1/4"-20 male threads at each end for mounting, 10" long. 3/4" npt male threaded inlet and outlet. Sst valve. 18-8 stainless steel for corrosion resistance. Applicable for precision liquid level control, and reverse osmosis water, boiler feed water systems, de-ionized, kitchen steam tables, increased resistance to corrosion and chemicals, cooling towers, ultra pure, food service and sanitary applications, livestock waterier, high pressure wash, swimming pools, evaporative coolers, aggressive water applications, industrial tanks, car wash, many other agricultural and industrial uses.

Robert Manufacturing RF610 Series Bob Red Brass Float Valve with Compound Operating Lever, 1-1/2" NPT Female Inlet x Free Flow Outlet, 180 gpm at 85 psi Pressure #ad - For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. 18-8 stainless steel for corrosion resistance. Male thread on both ends. Pvc for corrosion resistance. Rf610 adjusting short arm tapped 3/8"-16 SAE. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

18-8 stainless steel for corrosion resistance. Not compliant with cA Prop 65 or Safe Water Drinking Act. Pvc for corrosion resistance. 5/16"-18 male threads at each end for mounting, 14" long.

More information about Control Devices #ad


Similar products



Robert Manufacturing PF Series Bob Spherical Polypropylene Float, 3/8"-16 Female Spud, 8" Diameter, 158 oz Buoyancy

#ad
#ad
Control Devices 30859 #ad - Brass metal rod. For open tank service only. 158oz Buoyancy. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. 18-8 stainless steel for corrosion resistance. Natural color Polypropylene floats made with NSF listed material. Suitable for broad range of destructive fluids. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

Robert Manufacturing PF Series Bob Spherical Polypropylene Float, 3/8"-16 Female Spud, 8" Diameter, 158 oz Buoyancy #ad - 1" npt male threaded inlet and outlet. Heavy duty - red brass body. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. Pvc for corrosion resistance. Tank mount with extended threads on inlet side of valve for mounting through tank wall. Bob polypropylene floats are corrosion resistant, lightweight and suitable for a broad range of destructive fluids.

Pvc for corrosion resistance. Male thread on both ends. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. Rotating plunger. 1/4"-20 male threads at each end for mounting, 6" long.

More information about Control Devices 30859 #ad


Similar products

Comments are closed.