CURT#ad - Fits curt trailer lights #53440 and #53441. Designed to replace the side lens in combination trailer lights. Includes one lens only. Constructed of standard-color red plastic. Exceeds dot requirements for reflectors and markers.
Hopkins Towing Solutions#ad - Can withstand all weather conditions. Flexible wire provides larger turning radius. Verifies electrical continuity. Includes dust cover and grease packet to protect terminals. Easy to install.
LIMICAR#ad - Practical functions: complete led trailer lights kit functions as running light, brake light, turn signal light. Effectively protects the tail light from sand, dirt, dust, water or snow. This trailer tail light led is completely sealed. Bright lighting: led trailer light kit made of heavy duty steel, painted with quality black powder-coated finish.
Trailer led light Kit Adopts welding technology for better waterproof performance. Wire connection tips: white is ground, dump truck, trailers, black is low brightness, RV Camper, special vehicle, travel trailer, red is high brightness, usded as tail running marker lights.
Standard 6" oval trailer lights and 2" round clearance lights easy to install, stop light, first hardwire each pigtail wire to the corresponding wire on your trailer, then weld on or bolt on the light box to the trailer frame.
Waterproof: ip67 waterproof. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer. Universal fit: limicar led trailer lights kit directly weld on or bolt on frame of trucks, caravans, semi-trailer, usded as stop turn brake lights, snowmobiles and other 80-inch-wide trailers, buses, tractors, horse trailer, etc. Package includes: includes 2 x trailer tail lights; 2 x 6" oval red led trailer lights; 2 X 2" Round Red LED lights; 2 X 2" Round Rubber Grommets; 2 X 2 Wire Sealed Light Plug Pigtails.
ONLINE LED STORE#ad - Working smarter not harder - we like it when things are easy, so we’ve included an easy to use grommet for you to upgrade your lights in mere minutes. Go ahead, they won’t mind. Stand out - our amber and red lights offer two intensity levels to function as parking lights or turn/brake lights, while the white lights offer a straightforward, one intensity, super-bright reverse/back-up light.
We also added a space-saving 90 degree connector with 12" of wiring for installation in tight spaces.
Brighter lights safer nights - we designed our tail lights with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility.
Perfect fit - sae & dot fmvss-108 certified standard 6" size makes it easy to upgrade the dim, or damaged lights on your tractor, burnt-out, trailer, or work truck. Ready for the weather - with a sonically sealed, back them into a lake, submersible, IP67 waterproof rating, our lights are better suited to deal with the elements. Why? because getting rear-ended can really ruin your day.
Partsam#ad - This light is SAE and DOT approved;. Black plastic base;. Easy installation: this smoke lens rv led combination tail light is surface mount, which means that it installs flat against the surface of the trailer, but you may need a hole in the mounting surface for the wires to pass through.
White is your ground wire, black is your taillight, and then the red is the brake and turn signal. 7" by 2 1/2" apart; we truly offer 1 year warranty! if have any questions or issues about our RV Camper Trailer Stop Turn Brake Tail Lights, Please feel free to us and we will reply in 24 hours;.
Dimension: overall length: 8 5/8", the height: 3 7/8" and the total depth is 1 3/5"; mounting holes are approx. Package includes a set of two red surface mount tail light.
At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Perfect for surface mount on RV CAMPER TRAILER. They are more efficient, provide better light with less power output, or not brittle filaments;. They last about 50 times longer. This black base led low profile combination rv tail light is designed to mount on the surface of a trailer and Camper etc. There's three wires to connect.
ONLINE LED STORE#ad - Sonically sealed and boasting an impressive IP67 rating, these lights are submersible, weatherproof, and ready for years of service. Roadworthy - unlike many other lights on the market today, compliant, our surface mount LED lights comply with the DOT and SAE standards set out in FMVSS-108.
Be seen - tail lights have one job, to keep you visible and safe, and how well they do that job depends on how bright they are. Easier and faster - upgrading your old tail lights? putting lights on a new build? These surface-mount lights simplify the install process by eliminating the need for large oval holes.
This attention to quality means that every light you install is safe, and legal. Equipped with 10 high-intensity LEDs and light-diffusing lenses, our new oval trailer lights are very good at their job.
Multi-function - our amber and red lights offer two intensity levels to function as taillights or turn/brake lights, while the white lights offer a straightforward, one intensity, super-bright reverse/back-up light. Just one small hole, four self-tapping screws, and you're done. Confidence included - we've built confidence into each of our new 6" oval LED lights.
prolineppi#ad - Function: stop, turn, tail Light, License Plate Illuminator. Wiring information: 8" submersible lights have 3 wires one with ground ring. Led light: submersible light has LEDs. Over 12 led super diodes for each light. Material: Polycarbonate housing. Included: 2 red Submersible Trailer Lights.
Nilight#ad - 6” x2. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. 5” x 1. Hole size for surface mount is: 6. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light.
Universal application: work on a 12 v dc system, special vehicle, dump Truck, tail light for all kinds of trucks, semi-trailer, tractors, travel trailer, function as turn/Brake light, trailers, horse trailer, etc.
Just make sure the hole size before you purchase. For installation, and then connect the 3 wires to the corresponding wires on vehicles. Fit type: universal Fit. 2 years warranty Honored by Nilight.
Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Upgraded unique design: nilight's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it. 75”".
ONLINE LED STORE#ad - Ready for the weather - with a sonically sealed, back them into a lake, IP67 waterproof rating, submersible, our lights are better suited to deal with the elements. Perfect fit - sae & dot fmvss-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, trailer, or damaged lights on your tractor, or work truck.
Working smarter not harder - we like it when things are easy, so we’ve included an easy to use grommet for you to upgrade your lights in mere minutes.
Why? because getting rear-ended can really ruin your day. Brighter lights safer nights - we packed 24 leds into our sae & dot fwvss-108 certified tail lights, that’s twice as many as other LED tail lights on the market.
Stand out - our amber and red lights offer two intensity levels to function as parking lights or turn/brake lights, while the white lights offer a straightforward, one intensity, super-bright reverse/back-up light. We also added a space-saving 90 degree connector with 12" of wiring for installation in tight spaces. Go ahead, they won’t mind.
VINAUO#ad - Easy installation: directly mounts on surface of trailer - hardware not included. Energy efficient & multifunction camper light: low-profile rv tail light serves 4 function as stop light, turn signal light, taillight. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles.
Using advanced led combination light with better heat distribution, brighter and more energy-efficient than halogen bulbs. White + black wire: tail lights; White + Red Wire: Brake/Turn Signal Lights.
This rv camper light left hand driver's side: 29 diodes 24 Red++5 White ; Right Hand Passenger's Side: 24 Diodes; this light uses LEDs. White wire: NegativeGround. Durable white plastic base with acrylic RED lens, provide better light with less power output bring reliable visibility and safety even in inclement weather.
Waterproof: waterproof rate ip67, effectively protects the rv tail light from dust, sand, moisture, rain and other impact of inclement weather. Rv light set come with 3 specific colored wires for easy connection. Widely application: ideal for most 12v vehicles including Trailers, Pickup, Tractors, UTVs, UTEs, Caravans, Boat, flatbed, Camper, Semi-Trailer, Dump Truck, special vehicle etc.