As an Amazon Associate I earn from qualifying purchases.
1. TECH118 #ad
TECH118 Flashlight Holder -Duty Belt Basketweave Flashlight #adTECH118 #ad
- High-density foam core center 4-part laminate. Fits both 2" 50mm and 2. 25"58mm duty belts. Outer shell is fade and scratch resistant. Holster accommodates most 1 inch diameter standard size flashlights, and all flashlight lengths.
Opening for flashlight is 2. 5 cm wide by 4 cm long as measured from the interior. Designed to provide a secure fit and will stretch slightly to accommodate most flashlights. Made with high-quality synthetic leather material and workmanship for heavy duty use, protection, and versatility.
2. TECH118 #ad
Flashlight Holder / Holster -Fits Belts up to 2.25'' #adTECH118 #ad
- Fits both 2" 50mm and 2. 25"58mm duty belts and standard belts. Designed to provide a secure fit and will stretch slightly to accommodate most flashlights. Holster accommodates most 1 inch diameter standard size flashlights, and all flashlight lengths.
Outer shell made of high quality durable reinforced nylon material. Opening for flashlight is 2. 5 cm wide by 4 cm long as measured from the interior.
3. Ullnosoo #ad
Nylon Light Holster Pouch UIInosoo Carry Tactical Torch Handheld Flashlight, Open Top D Cell Compact Light Holder Case, Flashlight Holster for Duty Belt #adUllnosoo #ad
- Open design accommodates all flashlight lengths and fit most compact 1" diameter lights or thin ones with a big head. Replace broken pieces, black is very suitable for matching your flashlight, easy to put on and take off. Fits standard D cell flashlights.
Interior has smooth, tough padding and tight stitching at the seams for durability. Please note: This product does not include a flashlight. Durable and lightweight, it's nylon web with a poly core, which is strong and holds its shape well without bending and stretching randomly, which can hold the flashlight firmly.
Flashlight holder fits both 2" 50mm and 2. 25" 58mm duty belt. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase.
Suitable for people who often wear belts, freeing their hands. Small and portable, simple and elegant. Tightly fastened, don't worry about the flashlight falling out of your pocket. Premium thick material with pronounced heavy duty threading. Note that it is not a clip on, it requires a belt to pass through the hole to use. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.
4. Uncle Mike's #ad
Uncle Mike's Sentinel Flashlight Holder Sentinel Flashlight Holder 89063,Black #adUncle Mike's #ad
- Uncle mike's sentinel nylon d/c cell flashlight Holder is a convenient duty holder from Uncle Mike's rugged Sentinel Duty Gear line. The sturdy plastic hold ring is compatible with Mag Lites and other D/C cell flashlights typical to patrolmen.
The tough ballistic nylon strap resists tearing and abrasion, perfect for withstanding the stresses of use while on duty. The holder securely attaches to duty belts using a pair of heavy-duty snap closures. Duty Gear. The design is fully-ambidextrous, allowing for versatile wear on either side of the body.
5. LIVANS #ad
LIVANS Flashlight Holster for Belt, Flashlight Holder with Lever Side Lock System Rotatable Torch Holder Fit for 1"-1.55" Dia. Flashlight #adLIVANS #ad
- Capable of being mounted onto a duty belt, shooters belt, military or duty belts. Or push down to lock in for sturdy lighting. Easy operation for one hand: torch holster with a reliable lever side locking mechanism, on the side there is a simple paddle clip that pushes open with the thumb on the left side to unlock.
Adjustable carry angle: flashlight plastic holder with the 360° Swivel Mechanism let it can be rotated for 360 degrees, a total of 40 positions for comfortable easy carry in any position.
Widely compatible: holster for flashlight can be adjusted the tube width between 086"-1. 2" via twisting the pin before putting your flashlight in the holster, the holster's bottom bezel width is 1.
45" and its hole width is 1. 16", so the holster fits the flashlight bottom head diameter between 1. 17"-1. 48". You can find the right angle for your need. Adjustable belt clamp: flashlight holder adopts innovative locking designs, an adjustable belt clip can be adjusted the waistband width to fit your duty belt from 29-63mm / 1. 14"-2. 48".
6. NEXTORCH #ad
Nextorch V5 Tactical Flashlight Holster with Lever Side Lock System Only for 1"-1.25" Diameter Flashlight Holster Head Diameter 0.78"-1.18" Bottom Diameter 1.18" V5 #adNEXTORCH #ad
- Lightweight and portable Made of polymer material, which is lightweight, wear-resistant and corrosion-resistant. Holster for flashlight diameter is between 1"-1. 25"holster head diameter 078"-1. 18", flashlight Holster Clip 3.
15'', bottom Diameter 1. 18", suitable for less than 2" duty belt. Remember to adjust the holder width via twisting the pin before putting your flashlight in the holster.
Suitable for most flashlight modelsnextorch p80, stream led flashlight strion, E51, P81, HL-X and so on. A lever side lock mechanismwith the quick draw capable level locking system, and easy to operate.
On the side there is a clip which push open with thumb on the left side. A screw on the right side, make your flashlight be secure, which can be turned with fingers to loosen. 360 degree roration, 16 locking positionsv5 tactical flashlight holster can rotate for 360 degree and lock in one of 16 positions, you can find the right angle for your need and make hands-free when you are in duty.
|Manufacturer||StealStreet (Home) #ad|
7. ROCOTACTICAL #ad
ROCOTACTICAL Open Top Compact Light Holder, Duty Belt D Cell Light Carrier Case, 1680 Denier Ballistic Nylon #adROCOTACTICAL #ad
- Fits both 2" 50mm and 2. 25"58mm duty belt. Open top compact light Holder Made from 1680D Ballistic Nylon. Fits standard D cell flashlights. Size: 10l*6. 5w*5. 5hcm. Accommodates all flashlight lengths and fit most compact 1inch diameter lights.
8. AMZGOGO #ad
AMZGOGO Flashlight Holster Case, 360 Degree Rotatable Pouch Nylon Flashlight Holder Duty Belt for EDC 2 Pack #adAMZGOGO #ad
- High-quality material: this durable flashlight case is made of environmentally friendly nylon material, elastic band, friction-resistant and durable. Flashlight not included. Such as anker lc90 lc130, gearlight s1000 s2000, fenix uc30 uc35 e35, Surefire G2 6P E2L flashlight, etc.
Flexible rotatable clip: the tactical flashlight holster attaches the sturdy clip to your belt, or backpack for flexible operation, shoulder strap, allowing your flashlight to rotate 360° and lock in 8 different positions, aiming the direction of the light.
What you get: nylon flashlight Holster*2, Friendly Customer Service. Upgraded design: the upgraded version of the flashlight pouch has a thickened nylon strap with a buckle at the bottom, forming an open or closed design to prevent slipping, providing double protection for your flashlight, never worry about the trouble of the flashlight falling.
The clip measures 6. 2 inches long by 2. 3 inches wide and fits belts up to 2. 7 inches. Universal flashlight holder: suitable for small and medium handheld flashlights with a diameter of 098"~1. 2".
9. Nitecore #ad
NITECORE NTH10 Adjustable Hard Holster for Flashlights with 1 inch Tube Diameter #adNitecore #ad
- Durable construction - built from tough proprietary PE blend and with no moving parts, the NTH10 protects the crucial elements of your tactical flashlight.
Included in this bundle - is a brand new NTH10 tactical hard holster from NITECORE, Nitecore Sticker. Lightweight slim profile - takes up very little space, and weighs only 1.
4 ounces, allowing for freedom of movement without hindrance. Nth10 hard holster - is a great accessory for duty carry of your tactical flashlights with up to 1 inch tube diameter. Adjustable belt clip - can be secured onto belts with 1. 5, 2. 25 inch thickness, 2, 1. 75, or removed for up to 3 inches of clip space.
10. ROCOTACTICAL #ad
D/C Cell Flashlight Holder for Duty Belt, ROCOTACTICAL Side Handle Baton Ring Holder, Basketweave #adROCOTACTICAL #ad
- Fits d/c cell Flashlights. 1" web construction with snap Belt Loop fits Belts up to 2" wide, Basketweave look. Snap onto belt and hold ring for mag Lite and other D or C cell flash light.
Subdued black finish Rust Resistant Snaps with strong spring action. Durable high-impact plastic ring, ring diameter: 5cm/2inch.